WWCT03441-WDR – SATO CT4-LX 203dpi 4″ Thermal Transfer Printer, USB, WLAN, LAN, HF RFID, DISPENSER & RTC Very Cheap Pice

SATO CT4-LX 203dpi 4″ Thermal Transfer Printer, USB, WLAN, LAN, HF RFID, DISPENSER & RTC

Specs

Duty Cycle Labels/Day – 1000
Flash Memory – 4
Maximum Print Width – 4.1″ (104.1mm)
Maximum Print Width (Approx.) – 4 inch
Media Roll Core Diameter – 1.5″ (38.1mm)
Media Roll Outer Diameter – 5.04″ (128mm)
Media Sensor – Gap/Mark
Power – Auto-Switching
Power Cord – US
Power Supply Included – Yes
Printer Emulation – Auto Detect,SBPL,SDPL,SEPL,STCL,SZPL
Printer Interface – Bluetooth
Printer Interface – Ethernet
Printer Interface – USB
Printer Interface – Wireless
Print Resolution DPI – 200
Print Speed (ips/mmps) – 8ips (203.6mmps)
Print Technology – Thermal Transfer/Direct Thermal
Ribbon Wound – In/Out
SDRAM Memory – 1

To use this printer, first, make sure it’s properly connected using the available interfaces like USB, WLAN, LAN, or Bluetooth. Load the media roll with a core diameter of 1.5 inches (38.1mm) and an outer diameter of 5.04 inches (128mm). The printer can print up to 1000 labels per day with a print speed of 8ips (203.6mmps). For maintenance, keep the printer clean, especially around the print head. Regularly check the ribbon supply and replace it when needed. Make sure to use the correct power supply with an auto-switching feature and a US power cord. When setting up, it can auto-detect the printer emulation. Note that the media sensor uses gap/mark detection. Avoid overloading the printer beyond its duty cycle capacity.