Vibra-Tite 314 Plastic Bonder Cyanoacrylate
A single component low to medium viscosity cyanoacrylate that is used for a variety of bonding applications. Ideally suited for bonding plastics and rubber to themselves or various combinations. It is recommended for use on small gaps or relatively smooth even surfaces.
Size |
1 lb, 1 oz |
---|---|
Color |
Clear |
Viscosity Range (cP) |
110 |
Temp Range High (°F) |
200 |
Specifications Met |
A-A3097 Type II – Class 2 |
Specific Gravity |
1.05 |
Shear Strength (psi) |
3200 |
Key Substrates |
Plastics |
Gap Fill (in) |
0.01 |
Function |
Bonding |
Full Cure Time (hours) |
24 hrs |
Fixture Time (sec) |
20 |
Cure Type |
Moisture |
Competes with Loctite® |
Competes with Loctite® 414™ (414 is a trademark and Loctite is a registered trademark of Henkel IP & Holding GMBH LLC, Germany) |
Compatible Primers |
625, 626 |
Compatible Accelerators |
621, 623, 624 |
Base Material |
Ethyl |
Product Warnings |
Not recommended for oxygen rich environments |
Shelf Life (months) |
12 |
DOT Limited Quantites |
Cargo aircraft 220 L, Rail 60 L |
Country of Origin |
Japan |
HTS Code |
3506910000 |
UNSPSC |
31201636 |
How to use Vibra-Tite 314 Plastic Bonder Cyanoacrylate: First, make sure the surfaces you want to bond are clean and dry. Apply a small amount of the adhesive to one of the surfaces. Press the two surfaces together firmly for about 20 seconds until they stick. Let it cure for 24 hours. Note that it’s not for oxygen-rich areas. Keep it in a cool, dry place. If you’re using it on plastics or rubber, ensure they’re compatible. Shelf life is 12 months. If you need to speed up the curing process, you can use compatible accelerators like 621, 623, or 624. And if the gap between the surfaces is up to 0.01 inches, this product can handle it well.
Reviews
There are no reviews yet.