Vibra-Tite 306 Surface Insensitive – Wicking Cyanoacrylate
A single component low viscosity cyanoacrylate adhesive. It is an extremely fast setting adhesive, ideal for bonding preassembled parts. Ideal for bonding preassembled parts, rubber and leather. It is particularly designed to set and adhere rapidly to inactive surfaces.
| Size |
1 lb, 20 gm |
|---|---|
| Color |
Clear |
| Viscosity Range (cP) |
15, 35 |
| Temp Range High (°F) |
200 |
| Specifications Met |
A-A3097 Type II – Class 1 |
| Specific Gravity |
1.06 |
| Shear Strength (psi) |
3200 |
| Gap Fill (in) |
0.00 |
| Function |
Bonding |
| Full Cure Time (hours) |
24 hrs |
| Fixture Time (sec) |
15 |
| Cure Type |
Moisture |
| Competes with Loctite® |
Competes with Loctite® 406™ (406 is a trademark and Loctite is a registered trademark of Henkel IP & Holding GmbH LLC, Germany) |
| Compatible Primers |
625, 626 |
| Compatible Accelerators |
621, 623, 624 |
| Base Material |
Ethyl |
| Product Warnings |
Not recommended for oxygen rich environments |
| Shelf Life (months) |
12 |
| DOT Limited Quantites |
Cargo aircraft 220 L, Rail 60 L |
| Country of Origin |
Taiwan |
| HTS Code |
3506910000 |
| UNSPSC |
31201636 |
To use Vibra-Tite 306, clean the surfaces you want to bond thoroughly. Then apply a small amount of the adhesive to one of the surfaces. Press the two surfaces together firmly. It sets really fast, usually within 15 seconds, but it takes 24 hours to fully cure. Make sure to keep it away from oxygen-rich areas as it’s not recommended for such environments. Store it properly and it has a shelf life of 12 months. If you’re using it with other products, check the compatibility with primers like 625 and 626, and accelerators like 621, 623, and 624.
Be the first to review “Vibra-Tite – 306 Surface Insensitive – Wicking Cyanoacrylate Largest Supplier”
Related products
Adhesives, Sealants & Lubricants
Adhesives, Sealants & Lubricants
Reviews
There are no reviews yet.